Arado 130 (120b)
-
- UKDN Supporter
- Posts: 315
- meble kuchenne warszawa
- Joined: Wed Sep 29, 2004 9:14 am
Arado 130 (120b)
Hi all,
Would anyone have photos of an Arado 130 REAR control box showing the battery door arrangement?
Far as I remember, there were 2 screws holding on a small square metal door? I used open just one of these (from memory) and swivel it either way to insert/remove the batteries?
A mate is renovating a 130 and I would appreciate any Help & Tips and photos of the battery door/screws etc if at all possible.
You can mail me directly if easiest: des.dunne@yahoo.ie
Many thanks
Des D
Would anyone have photos of an Arado 130 REAR control box showing the battery door arrangement?
Far as I remember, there were 2 screws holding on a small square metal door? I used open just one of these (from memory) and swivel it either way to insert/remove the batteries?
A mate is renovating a 130 and I would appreciate any Help & Tips and photos of the battery door/screws etc if at all possible.
You can mail me directly if easiest: des.dunne@yahoo.ie
Many thanks
Des D
- the-roman
- Site Admin
- Posts: 7640
- Joined: Mon Jan 07, 2008 6:27 pm
- Main Detector: XP Deus II
- Location: weston-super-mare
Re: Arado 130 (120b)
Hi Des,
I found this on the net, hope it's the right one mate
I found this on the net, hope it's the right one mate
- Attachments
-
- $_86 (6).JPG (321.36 KiB) Viewed 8425 times
-
- $_86.JPG (177.44 KiB) Viewed 8425 times
-
- $_86 (1).JPG (148.9 KiB) Viewed 8424 times
XP Deus II - NCMD member.
Re: Arado 130 (120b)
Looks right to me Keith. I had the 130 which control box wise was Very similar. Great machine for the time. But heavy compared to todays machines.
Professionally aimless wandering.
seDEUSed
seDEUSed
- dig-it-pete
- Finds Advisor & Moderator
- Posts: 11217
- Joined: Tue Oct 07, 2014 2:08 pm
- Main Detector: Manticore
- Location: East Devon
- Contact:
- the-roman
- Site Admin
- Posts: 7640
- Joined: Mon Jan 07, 2008 6:27 pm
- Main Detector: XP Deus II
- Location: weston-super-mare
Re: Arado 130 (120b)
Get it back out mate, you might find your first Saxon with itdig-it-pete wrote:Still got my Arado 130 in my shed!!
XP Deus II - NCMD member.
- dig-it-pete
- Finds Advisor & Moderator
- Posts: 11217
- Joined: Tue Oct 07, 2014 2:08 pm
- Main Detector: Manticore
- Location: East Devon
- Contact:
Re: Arado 130 (120b)
Mmmmm!!! Don't mention that wordthe-roman wrote:Get it back out mate, you might find your first Saxon with itdig-it-pete wrote:Still got my Arado 130 in my shed!!
I used to like using it though back in the early 1990's, I got the arm aid and fitted the additional threshold adjuster too.
Minelab Manticore
Re: Arado 130 (120b)
Ooof!the-roman wrote:Get it back out mate, you might find your first Saxon with itdig-it-pete wrote:Still got my Arado 130 in my shed!!
Don’t mention the ‘S’ word Keith!
Professionally aimless wandering.
seDEUSed
seDEUSed
Re: Arado 130 (120b)
Pete,dig-it-pete wrote:Still got my Arado 130 in my shed!!
Could you do me a favour if you would be kind enough to measure the dimensions of the battery cover door please?
My mate is re-building his second hand purchase which is in an awful state and asked me that?
Furthermore, does anyone know where a second hand meter housing could be found? His is broken. He's looking too make one from ABS material but would prefer 'the original part'
Does anyone repair them now in the UK: was 'Pentechnic' the official repair centre?
Do you think he might still have any parts?
Finally, whatever happened to the 'Technology' of 'Arado?' Did anyone buy the rights to it?
Many thanks
Des
- dig-it-pete
- Finds Advisor & Moderator
- Posts: 11217
- Joined: Tue Oct 07, 2014 2:08 pm
- Main Detector: Manticore
- Location: East Devon
- Contact:
Re: Arado 130 (120b)
Hi Des - I will hunt out my Arado and measure the battery housing plate.Desreally wrote:Pete,dig-it-pete wrote:Still got my Arado 130 in my shed!!
Could you do me a favour if you would be kind enough to measure the dimensions of the battery cover door please?
My mate is re-building his second hand purchase which is in an awful state and asked me that?
Furthermore, does anyone know where a second hand meter housing could be found? His is broken. He's looking too make one from ABS material but would prefer 'the original part'
Does anyone repair them now in the UK: was 'Pentechnic' the official repair centre?
Do you think he might still have any parts?
Finally, whatever happened to the 'Technology' of 'Arado?' Did anyone buy the rights to it?
Many thanks
Des
I bought my machine from Mark See-Evans in Bath - he was well in with the chap that made Arado's and seem to remember he made Mark a huge search coil and believe he found a Viking burial site with it!!! Memory is a bit vague now as this was over 20 years ago. It might be worth trying to track down Mark though?
Minelab Manticore
Re: Arado 130 (120b)
"Much appreciated! Made even more so difficult as my mate is in Pittsburgh, Pennsylvania USA"
Re: Arado 130 (120b)
...just One more Q he asked me: on the battery cover 'screws'. does just one open and the other is a grub that doesn't screw out so you 'swivel' the plate?
- IronRon
- UKDN Silver Supporter and UKDN Magazine Contributor
- Posts: 1979
- Joined: Sun Apr 24, 2005 10:11 am
Re: Arado 130 (120b)
If you look at kieths image of the backplate above , They dont look like screws. cant see any slots..They look like catchplates twist & pull ,Desreally wrote:...just One more Q he asked me: on the battery cover 'screws'. does just one open and the other is a grub that doesn't screw out so you 'swivel' the plate?
Re: Arado 130 (120b)
"Did you manage to get out to your shed Pete? Don't forget the measure tape" Lol...
- dig-it-pete
- Finds Advisor & Moderator
- Posts: 11217
- Joined: Tue Oct 07, 2014 2:08 pm
- Main Detector: Manticore
- Location: East Devon
- Contact:
Re: Arado 130 (120b)
Ah!! Jolly good job you reminded me mate - my mind has been otherwise engaged on our big charity rally on SundayDesreally wrote:"Did you manage to get out to your shed Pete? Don't forget the measure tape" Lol...
Minelab Manticore