10x12 widescan dd coil
- mdjlucan
- Registered User
- Posts: 114
- meble kuchenne warszawa
- Joined: Sat Nov 12, 2005 12:19 pm
- Main Detector: xp deus
- Location: london
10x12 widescan dd coil
iv got a laser trident 2 si im going to put a 10x12 widescan coil on it do you have to reajust it
XP DEUS
Re: 10x12 widescan dd coil
Not sure but if you can get your hands on the little 5-6 incher, give it a try, my wife's is dynamite on the Cibola
-
- Registered User
- Posts: 33
- Joined: Wed Dec 21, 2005 10:32 pm
Re: 10x12 widescan dd coil
As you have the trident 11 all you have to do is switch to manual ground balance raise the coil up and down over the ground you are searching turn the gb knob until you get a steady tone. AS you are going from concentic to widescan there maybe some difference in calibration some times you can get away with it if you are swoping concentric for concentric. If you had the Trident 1 then you would have to go inside the control box to get to the trimmer screw. I paid £140 for the 12x10 but wished i had bought the 5 inch as it tends to throw the detector off ballance a bit. Had some great finds with it you should do well. Good luck.