In the spirit of co-operation and for the greater benefit of the hobby UKDN would like to encourage our membership to help this detecting led project which is currently being published in the Searcher magazine. If you can help or have a query about a find you have then please do contact these guys. Many thanks UKDN Team.
The [Romanesque] Chapes Research Project
This ongoing research project is being conducted by Jim Paterson [Old Yellowbelly of the Searcher magazine] and myself [Peter Woods]. Th results are being published in the Searcher at intervals as and when a new body of material becomes available and there are new developments to report.
The chapes that we are interested to hear about fall into two main categories:
[a] the openwork triangular types
the zoomorphic types.
The triangular types may either be of plain openwork construction e.g.:
CHAPE NO.9C attachment
or, much more rarely, incorporating equine features on the fold e.g.:
ADR CHAPE NO.25A.
The zoomorphic types fall into earlier [? northern] types with a very rudimentary winged horse [or other beast] e.g.
CHAPE 14SC-2 [where the wing appears as a club shape and joins up with the tail to form a triangular aperture]
or the later [? southern] winged horse type where the horse is much more lifelike and the wing appears as a triangle on the horse's back e.g.:
CHAPE 13SC-2.
There are a few oddities as well e.g.:
CHAPES NOS. 6A and 7A.
All of the chapes share the following characteristic - they have all been made by the 'fold-over' technique resulting in the upper and lower sides [mostly] being identical. This gives a fold on one side which fits snugly against one edge of the sheath and the other side is secured by one or two small rivets. The triangular and later zoomorphic types have a side extension with a rivet at the top. This arm is frequently missing as the point of connection with the main part of the chape is an area of weakness.
The triangular types were intended for sheaths with pointed ends and the others were intended for the far less common sheaths with square ends [as per the example found in the Ely excavations].
Most of the known examples have been found by metal-detectorists. Thanks to the efforts of such detectorists we know a great deal more about the development of these chapes than we did two years ago when this project was initiated. Jim Patterson and myself would be delighted to hear from any other metal detectorists who may have found one of these quite uncommon artefact's [even if it is only part of an example]. All confidences will be respected. I may be contacted by e-mail on arestos@talktalk.net.
With thanks,
Peter Woods
The [Romanesque] Chapes Research Project
- petethedig
- UKDN Valued Member and Diamond Supporter
- Posts: 16753
- meble kuchenne warszawa
- Joined: Tue Nov 05, 2002 2:41 pm
- Main Detector: Minelab Etrac
- Location: Gloucestershire
- Contact:
The [Romanesque] Chapes Research Project
- Attachments
-
- ADR_CHAPE_NO_25A.jpg (83.72 KiB) Viewed 10449 times
-
- CHAPE_13SC-1.jpg (62.43 KiB) Viewed 10448 times
-
- CHAPE_14SC-2.jpg (48.75 KiB) Viewed 10442 times
-
- CHAPE_NO_6A.jpg (109.9 KiB) Viewed 10442 times
-
- CHAPE_NO_7A.jpg (67.49 KiB) Viewed 10431 times
-
- CHAPE_NO_9C.jpg (68.5 KiB) Viewed 10422 times
Re: The [Romanesque] Chapes Research Project
Here's a typology from a German book on chapes:
- Attachments
-
- band.jpg (21.73 KiB) Viewed 10345 times
Re: The [Romanesque] Chapes Research Project
Here are some reconstructions of (romanesque) chapes
- Attachments
-
- REkonstruktion.jpg (35.2 KiB) Viewed 10311 times
- petethedig
- UKDN Valued Member and Diamond Supporter
- Posts: 16753
- Joined: Tue Nov 05, 2002 2:41 pm
- Main Detector: Minelab Etrac
- Location: Gloucestershire
- Contact:
Re: The [Romanesque] Chapes Research Project
Thanks Folkert What we need is for anyone finding such illusive artifacts to help these guys out and show the hobby in a good light, showing that we can be of benefit to the wider community where studies of this type are a fabulous resource to all!
Check your grot boxes guys and gals, there must be a few as yet not found
Check your grot boxes guys and gals, there must be a few as yet not found
- Sukisal
- Registered User + UKDN Magazine Contributer
- Posts: 1605
- Joined: Wed Feb 28, 2007 9:12 am
- Location: Suffolk
Re: The [Romanesque] Chapes Research Project
I posted mine off to them and got a fantastic write up on it etc.
- yesma100
- UKDN Supporter
- Posts: 340
- Joined: Wed Oct 25, 2006 2:28 pm
- Main Detector: Minelab SE
- Location: Gloucester
Re: The [Romanesque] Chapes Research Project
For those who didn't know what a Chape is (I was one up til a few seconds ago). Defined in Wikipedea.....The metal fitting where the blade enters the leather or metal scabbard is called the throat, which is often part of a larger scabbard mount, or locket, that bears a carrying ring or stud to facilitate wearing the sword. The blade's point in leather scabbards is usually protected by a metal tip, or chape