10x12 widescan dd coil

Post Reply
User avatar
mdjlucan
Registered User
Posts: 114
meble kuchenne warszawa
Joined: Sat Nov 12, 2005 12:19 pm
Main Detector: xp deus
Location: london

10x12 widescan dd coil

Post by mdjlucan »

iv got a laser trident 2 si im going to put a 10x12 widescan coil on it do you have to reajust it
XP DEUS

Sandbanks
Registered User
Posts: 1695
Joined: Sat Apr 26, 2008 8:50 pm

Re: 10x12 widescan dd coil

Post by Sandbanks »

Not sure but if you can get your hands on the little 5-6 incher, give it a try, my wife's is dynamite on the Cibola :g50:

mickeygeorge
Registered User
Posts: 33
Joined: Wed Dec 21, 2005 10:32 pm

Re: 10x12 widescan dd coil

Post by mickeygeorge »

As you have the trident 11 all you have to do is switch to manual ground balance raise the coil up and down over the ground you are searching turn the gb knob until you get a steady tone. AS you are going from concentic to widescan there maybe some difference in calibration some times you can get away with it if you are swoping concentric for concentric. If you had the Trident 1 then you would have to go inside the control box to get to the trimmer screw. I paid £140 for the 12x10 but wished i had bought the 5 inch as it tends to throw the detector off ballance a bit. Had some great finds with it you should do well. Good luck. :g50:

User avatar
mdjlucan
Registered User
Posts: 114
Joined: Sat Nov 12, 2005 12:19 pm
Main Detector: xp deus
Location: london

Re: 10x12 widescan dd coil

Post by mdjlucan »

thanks mickey
XP DEUS

Post Reply

Return to “Detectors & Tips”